How to Adjust Underlay Stitches for Better Design Coverage
EmbroideryGo · 11/15/2026 · 9 min read
Article map

# How to Adjust Underlay Stitches for Better Design Coverage
Underlay stitches are the hidden foundation that separates a flat, disappointing embroidery result from one that looks crisp, dimensional, and professional. Most beginners focus entirely on the top layer of stitching, never realizing that the layers beneath it are doing most of the structural work. Getting underlay right means your satin columns stay smooth, your fill areas look even, and your fabric behaves the way you need it to.
This guide walks you through the practical decisions involved in adjusting underlay for better coverage. Whether you are editing a design file you downloaded from EmbroideryGo's embroidery designs collection or digitizing something from scratch, understanding underlay mechanics will immediately improve your finished results. The principles apply across most home and commercial machines, including those from Brother, Janome, Pfaff, and Tajima.
What Underlay Actually Does
Underlay stitches are sewn before the main fill or satin stitches and serve several distinct purposes. They compress and stabilize the fabric so that top stitches do not sink into the weave. They also create a slight loft that gives satin stitches a rounder, more finished appearance. On stretchy or loosely woven fabrics, underlay essentially locks the material in place so the design does not distort as the hoop moves.
Think of underlay as the primer coat before painting. Skipping it might seem like a time-saver, but the final result will always show the difference. Machine embroidery has evolved significantly over decades, and modern digitizing software now gives you precise control over underlay type, density, and angle — controls that were once only available on high-end commercial systems.
The Main Types of Underlay Stitches
Before you can adjust underlay intelligently, you need to know what each type does.
- Edge walk underlay runs a single line of stitching around the perimeter of a shape. It is the lightest option and works well for stable woven fabrics with small lettering or fine detail areas.
- Center walk underlay runs a single line down the center of a satin column. It is commonly used for narrow columns and helps prevent the column from rolling or shifting.
- Zigzag underlay lays a loose zigzag pattern across a shape before the top stitches are applied. It adds loft and is ideal for satin columns of medium width.
- Tatami or fill underlay covers an entire fill area with a low-density run of stitches at a different angle than the top fill. It is the standard choice for large filled areas.
- Double zigzag underlay uses two passes of zigzag in opposite directions, creating a grid-like base. This is the go-to option for stretchy fabrics like polo shirts or athletic wear.
- Combination underlay pairs an edge walk with a zigzag or fill underlay, giving you both perimeter stability and interior loft at the same time.
Knowing which type to reach for first saves you from trial-and-error runs that waste thread and stabilizer.
Adjusting Underlay Density
Density refers to how closely the underlay stitches are spaced. A denser underlay compresses the fabric more aggressively and creates a firmer base, but it also adds stitch count and can cause the fabric to pucker if overdone. A lighter underlay leaves more room for the top stitches to settle naturally into the material.
For most woven fabrics such as cotton twill or canvas, a moderate underlay density is the right starting point. For knits and fleece, increase the density slightly so the underlay actually tames the fabric movement before the top layer arrives. For delicate fabrics like organza or thin silk, reduce density significantly and consider using only an edge walk to avoid distortion. Always test on a scrap of the actual fabric you plan to use, not a substitute.
Matching Underlay Angle to Top Stitch Angle
One of the most effective and often overlooked adjustments is setting the underlay angle perpendicular to the top stitches. If your satin column runs at zero degrees, your zigzag underlay should run at ninety degrees. This cross-grain relationship means the underlay stitches physically push the fabric fibers in a different direction than the top stitches will travel, which creates a more stable and even surface.
In fill areas, the same logic applies. If your tatami fill runs at forty-five degrees, set your fill underlay to run at one hundred thirty-five degrees or at zero degrees. The contrast in angle prevents the underlay from simply disappearing into the same channels the top stitches will follow. Most digitizing software lets you set this angle independently for each element, so take the time to check it for every object in your design rather than accepting the default.
Underlay for Different Fabric Types
Fabric type is the single biggest variable in underlay decisions. A setting that works beautifully on a structured cap front will cause problems on a soft fleece jacket. Here is a practical breakdown by fabric category.
Woven fabrics with a tight weave, such as twill, denim, or canvas, are the most forgiving. An edge walk plus a moderate zigzag underlay is usually sufficient. Loosely woven fabrics like linen or burlap need a denser underlay because the top stitches can sink between the weave threads without it. Knit fabrics, including jersey and pique, require double zigzag or combination underlay to prevent the design from stretching and distorting with the fabric. Fleece and terry cloth have a pile that can swallow stitches entirely, so a firm tatami underlay is used to compress the pile before the top layer is applied. Leather and vinyl do not shift the way fabric does, so underlay can be minimal — an edge walk is often enough.
If you are unsure which approach suits your project, the EmbroideryGo help center has additional guidance on fabric preparation and stabilizer pairing that works alongside these underlay decisions.
Underlay in Lettering and Small Details
Small text and fine detail elements need special attention because the shapes are narrow and the margins for error are small. For lettering with column widths under two millimeters, a center walk underlay is usually the only appropriate choice. Adding a zigzag to a column that narrow will create bulk and cause the letter strokes to look lumpy or uneven.
For lettering between two and four millimeters wide, a single zigzag underlay works well. Above four millimeters, you can introduce a combination underlay. The key rule is to keep underlay proportional to the element size. Applying heavy underlay to fine details is one of the most common mistakes in digitizing, and it shows up immediately in the finished embroidery as stiff, raised strokes that do not match the surrounding design.
Testing and Refining Your Underlay Settings
No underlay setting is final until you have sewn a test on the actual fabric and stabilizer combination you plan to use. Sew the test at the same hoop tension you will use for production. After the test is complete, examine the top stitches carefully. If you see fabric texture showing through the top layer, the underlay density is too low or the type is wrong for the fabric. If the design feels stiff and boardlike, the underlay is too heavy. If the edges of fill areas are lifting or rolling, add an edge walk underlay to the perimeter.
Commercial machine manufacturers like Tajima publish technical resources on stitch quality that can help you interpret what you are seeing in your test results. Combining that kind of technical reference with hands-on testing is the fastest way to build reliable underlay judgment.
Saving and Reusing Your Settings
Once you find underlay settings that work well for a specific fabric and design type, save them as a template or style in your digitizing software. Most programs allow you to store object properties and apply them to new elements quickly. This is especially useful if you regularly embroider on the same garment type, such as polo shirts or structured caps.
You can also find well-digitized design files on the EmbroideryGo blog that demonstrate professional underlay construction, which you can study by opening the files in your software and examining how the underlay layers are built. Learning from finished professional files is one of the most efficient ways to accelerate your understanding of how underlay decisions translate into real embroidery results.
Questions from this article
- Which underlay type should I use for a wide satin column versus a narrow one?
- The article explains that center walk underlay is commonly used for narrow satin columns to prevent rolling or shifting, while zigzag underlay is ideal for medium-width columns because it adds loft. For stretchy fabrics with satin columns of any width, double zigzag underlay is recommended as it creates a grid-like base that controls fabric movement more aggressively.
- How do I know whether my underlay density is too high or too low after sewing a test?
- The article states that if fabric texture shows through the top stitches, the underlay density is too low or the wrong type was chosen for the fabric. If the finished design feels stiff and boardlike, the underlay is too heavy. These two visual and tactile checks are the primary indicators the article provides for evaluating density after a test sew-out.
- What underlay approach is recommended for delicate fabrics like organza or thin silk?
- For delicate fabrics such as organza or thin silk, the article recommends reducing underlay density significantly and considering the use of only an edge walk underlay. This lighter approach is intended to avoid distortion that heavier underlay types would cause on such fragile materials. The article also emphasizes always testing on the actual fabric rather than a substitute.
- Why should the underlay angle be set perpendicular to the top stitch angle?
- The article explains that setting the underlay angle perpendicular to the top stitches creates a cross-grain relationship, meaning the underlay pushes fabric fibers in a different direction than the top stitches will travel. This produces a more stable and even surface for the top layer to sit on. The same principle applies in fill areas, not only in satin columns.
- How can I avoid having to redo underlay settings from scratch every time I start a new project?
- The article advises saving successful underlay settings as a template or style within your digitizing software once you find a combination that works well for a specific fabric and design type. Most programs allow you to store object properties and apply them quickly to new elements, which is particularly useful when you regularly embroider on the same garment type such as polo shirts or structured caps.



